TVLogic LVM-174W - Manual (Page 29)

Multi Format LCD Monitor 29
6. Firmware Upgrade & Color Calibration
[1] Firmware Upgrade
● ●
The USB portable storage device (Thumb
drive) is needed for F/W Upgrade.
● ●
Select the [Display&Set ] menu to activate
- Connect the USB portable storage device to
the USB Slot on the front of the monitor.
- Set the [S/W upgrade] as [On].
- The [S/W upgrade start] activates when the
USB portable storage device connection is
completed.
* If the feature does not activate, disconnect
the USB and re-connect to the monitor.
Repeat the same process in 5 seconds.
- Set the [S/W upgrade] as [On].
-After [S/W upgrade start] is selected, the
message window comes on. Select the [Yes]
to proceed the Uprgrade.
* While the Upgrade is conducting, the
monitor screen turns off and the monitor
stops functioning.
* When the Upgrade is completed, TVLogic
logo will appeared on the screen and the
monitor reboots.
* The Upgrade process takes about 10~20
minutes according to the Firmware type.
- Then the USB portable storage device is
searched automatically.