TVLogic LVM-174W - Manual (Page 27)

Multi Format LCD Monitor 27
● ●
Internal Pattern
- Generates ColorBar, Pludge and Grayscale
Pattern internally.
- Selectable range for Gray Pattern is from 0%
to 100% with 5% increment.
● ●
3G Format
- Used to select 3G-SDI A/B input format
among NORMAL MODE(AUTO - A 422
10BIT_YCbCr 50/60P), A 444 10/12BIT_YCbCr,
A 444 10/12BIT_RGB,A 422 12BIT_YCbCr, B
444 10/12BIT_ YCbCr, B 444 10/12BIT_RGB, B
422 12BIT_YCbCr, B 422 10BIT_YCbCr 50/60P).
- In NORMAL MODE, automatically detected
when Payload signal is contained.
● ●
Back Light
- Used to indicate the backlight level.
- In case of System Default, the value returns
to factory default(after color calibration).
- Available values are from 0 to 100.
● ●
Closed Caption
- This item selects Closed Caption.
- Available modes are OFF, 708, 608(LINE21)
, 608(ANC), *OP47 and *OP42. (* Only
available with LVM-212W model.)
* 608 : CEA-608-B, 708 : CEA-708-C standard
display only.
● ●
TimeCode Enable
- Used to set the time code among OFF, VITC
and LTC.
● ●
Focus Assist
- Focus Assist helps the shooters to easily find
out the exact area in the picture with good
focus, simply by adding colors on the shape
or boundaries of the object in the picture.
- Activates in order of [(Mono) On][(Color] On]
[Off]
* (Mono) On : The boundary of the area with
good focus is colored with the designated
color, while the rest of the areas(pixels) have
only Y’(Luma) signals to be black & white
image.
* (Color) On : Only the boundary of the
area with good focus is displayed with the
designated color.
* See section “8.Other Functions [9] Focus
Assist” for more information.
● ●
Focus Assist Color
- Used to select a color for FOCUS ASSIST
among red, green and blue.
● ●
Focus Assist Level
- Used to set the edge difference value
between the edges in an image.
- Available values are from 0 to 100. Larger
value means more sophisticated detail
detection.
- Designated color is displayed when the
difference of the edges exceeds the
previously set value.
- This feature is available only when the
FOCUS ASSIST mode is activated.
5. Menu Operations
[7] Display & Set