KBC Networks ESML8P-PC2 - Manual (Page 90)

Appendix A—Command Sets
Command Level
User EXEC E
Privileged EXEC P
Global configuration G
VLAN database V
Interface configuration I
Modes
Access
Method
Prompt Exit Method About This Model
User EXEC
Begin a session
with your
switch.
switch>
Enter logout
or quit.
The user commands
available at the user level
are a subset of those
available at the privileged
level.
Use this mode to
• Perform basic tests.
• Displays system
information.
Privileged
EXEC
Enter the enable
command while
in user EXEC
mode.
switch#
Enter disable
to exit.
The privileged commands
are the advanced mode.
Use this mode to
• Display advance function
states
• Save configurations
Global
Configuration
Enter the
configure
command while
in privileged
EXEC mode.
switch
(config)#
To exit to
Privileged
EXEC mode,
enter exit or
end
Use this mode to
configure parameters to
be applied to your switch.
VLAN database
Enter the vlan
database
command while
in privileged
EXEC mode.
switch (vlan)#
To return to
User EXEC
mode, enter
exit.
Use this mode to
configure VLAN-specific
parameters.
Interface
configuration
Enter the
interface
command with a
specific interface
while in global
configuration
mode
switch (config-
if)#
To return to
the previous
mode, enter
exit or end.
Use this mode to
configure parameters for
the switch and Ethernet
ports.