beautypg.com

KBC Networks ESML8P-PC2 User Manual

Page 51

background image

Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.

Page 51 of 110

www.kbcnetworks.com

Configuration for Switch 2

Switch 2 configuration interface

1.

Set System Priority of the trunk group. The field displays with ‘1’ by default.

2.

Select a trunk group ID by clicking the pull-down menu.

3.

Enable LACP.

4.

Include the member ports by highlighting the ports in the right list box and then click
the Add button. Note the number in the Work Ports field changes automatically
depending on how many ports you have selected.


Aggregation Information of Switch 2

5.

Click on the Aggregator Information tab to check the trunked group information as the
illustration shown above after the two switches configured.