KBC Networks ESML8P-PC2 - Manual (Page 84)

Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 84 of 110 www.kbcnetworks.com
• Priority: Click the pull-down menu to choose the priority of power supplying.
• Port Limit (<15400) mW: Users can key in the power limit value under 15.4 watts.
• Mode: Displays the operating mode of the port.
• Current (mA): Displays the operating current of the port.
• Voltage (V): Displays the operating voltage of the port.
• Power (mW): Displays the power consumption of the port.
• Determined Class: Displays the class of the connected PD.
• And then, click Apply to carry settings into effect.
5.2.27 Factory Default
Click the Reset button to reset the switch back to factory defaults. Before resetting, you can tick
the checkboxes to keep the current IP address and user name/password.
Factory Default interface
5.2.28 Save Configuration
Save all changes you have made in the system. To ensure the configurations you have made will
be implemented the next time you power on the switch, remember to click the Save button to
save all configurations into the flash memory.
Save Configuration interface