KBC Networks ESML8P-PC2 - Manual (Page 100)

Ethernet Switch User Manual
Manual-ESML8P-PC2_Series-Rev1211
Copyright © KBC Networks Ltd.
Page 100 of 110 www.kbcnetworks.com
MAC / Filter Table Commands Set
Command Level Description Example
mac-address-table static
hwaddr
[MAC]
I Configure MAC address
table of interface (static).
Switch(config)#interface fastEthernet
2
switch(config-if)#mac-address-table
static hwaddr 000012345678
mac-address-table filter
hwaddr
[MAC]
G Configure MAC address
table(filter)
switch(config)#mac-address-table
filter hwaddr 000012348678
show mac-address-table P Show all MAC address
table
switch#show mac-address-table
show mac-address-table
static
P Show static MAC address
table
switch#show mac-address-table
static
show mac-address-table
filter
P Show filter MAC address
table.
Switch#show mac-address-table
filter
no mac-address-table
static hwaddr
[MAC]
I Remove an entry of MAC
address table of interface
(static)
switch(config)#interface fastEthernet
2
switch(config-if)#no mac-address-
table static hwaddr 000012345678
no mac-address-table filter
hwaddr
[MAC]
G Remove an entry of MAC
address table (filter)
switch(config)#no mac-address-table
filter hwaddr 000012348678
no mac-address-table G Remove dynamic entry of
MAC address table
switch(config)#no mac-address-table
SNMP Commands Set
Command Level Description Example
snmp system-name
[System Name]
G Set SNMP agent system
name
switch(config)#snmp system-name
l2switch
snmp system-location
[System Location]
G Set SNMP agent system
location
switch(config)#snmp system-location
lab
snmp system-contact
[System Contact]
G Set SNMP agent system
contact
switch(config)#snmp system-contact
where
snmp agent-mode
[v1v2c|v3|v1v2cv3]
G Select the agent mode of
SNMP
switch(config)#snmp agent-mode
v1v2cv3
snmp community-strings
[Community]
right
[RO/RW]
G Add SNMP community
string.
switch(config)#snmp community-
strings public right rw
snmp-server host
[IP address]
community
[Community-string]
trap-version
G Configure SNMP server
host information and
community string
switch(config)#snmp-server host
192.168.1.50 community public
trap-version v1
(remove)
switch(config)#