KBC Networks ESML6-P3 - Manual (Page 46)

Ethernet Switch User Manual
Manual_cmd_line_config-ESML6-P3-Rev1106
Copyright © KBC Networks Ltd. Page 45 of 49 www.kbcnetworks.com
Type: log-and-trap
Community: public
LastTimeSent: 0days 2h:15m:45s.0th
Owner: kyland
Status SNMP_VALID
Display RMON log
SWITCH#show rmon log
Display current RMON log.
SWITCH#show rmon log
logEvntIndex: 1 logIndex: 1
logTime: 0days 2h:15m:42s.0th
logDescription: alarm rising 2,1.3.6.1.2.1.16.1.1.1.14.1,1,5234,100
logEvntIndex: 1 logIndex: 2
logTime: 0days 2h:15m:45s.0th
logDescription: alarm rising 1,1.3.6.1.2.1.2.2.1.16.1,1,288854,100
14 ALARM management configuration
14.1 Introduction
The ESML6-P3 series switches support device alarm and related alarm report (SNMP
trap), alarm enable/disable and alarm searching. This ensures that an alarm is reported
in a timely and accurately manner.
The ESML6-P3 series switches support the following alarm type:
Alarm type Meaning
Link down alarm Alarm while the link is down
DT-Ring master ring open
alarm Alarm while the master’s ring status is
open
Power supply alarm Alarm while any of the working dual
power supplies power is low level
IP conflict Support monitoring IP address conflict
MAC conflict Support monitoring MAC address
conflict