KBC Networks ESML6-P3 - Manual (Page 16)

Ethernet Switch User Manual
Manual_cmd_line_config-ESML6-P3-Rev1106
Copyright © KBC Networks Ltd. Page 15 of 49 www.kbcnetworks.com
3.4 ACL configuration
Setting ‘accept’ mode for port ACL:
SWITCH(config-if-eth1)# acl mode accept
Setting ‘reject’ mode for port ACL:
SWITCH(config-if-eth1)# acl mode reject
Setting none for port ACL:
SWITCH(config-if-eth1)# acl mode none
Adding MAC address for the port:
KYLAND(config-if-eth1)# acl mac add HH:HH:HH:HH:HH:HH
Delete MAC address for the port:
SWITCH(config-if-eth1)# acl mac delete HH:HH:HH:HH:HH:HH
3.5 Configure query function
3.5.1 ACL configuration query
Query ACL port mode configuration:
SWITCH(config-if-eth1)# show acl mode
Query of ACL port MAC address configuration
SWITCH(config-if-eth1)# show acl mac
3.5.2 Port statistics query
SWITCH(config-if-eth1)# show stats
3.5.3 Port mirroring query
SWITCH# show mirror
3.5.4 Port configuration query
KYLAND# show int eth <1, 24>
Note: The parameter <1, 24> is the Port ID.