KBC Networks ESML6-P3 - Manual (Page 39)

Ethernet Switch User Manual
Manual_cmd_line_config-ESML6-P3-Rev1106
Copyright © KBC Networks Ltd. Page 38 of 49 www.kbcnetworks.com
Display Trap IP address list:
SWITCH#show snmp trapiplist
Display SNMP receiving/sending message statistics:
SWITCH#show snmp status
13 Remote Network Monitoring (RMON)
Configuration
13.1 Introduction
RMON supports the monitoring and protocol analysis of LANs. It is used to exchange
network monitoring data between the network monitor and the console system in a
client/server configuration. RMON provides distributed, programmable protocol analysis.
The RMON function allows the user to operate among multiple manufacturers for SNMP
management and monitoring agents. It offers a standard for a group of MIBs to allow the
collection of network statistics unavailable via SNMP. Domain values can be set for critical
parameters so that alarm signals are sent automatically.
This menu option contains RMON statistics, RMON history, RMON alarm and RMON event.
13.2 RMON configuration
13.2.1 RMON operating parameters setting
Create statistics group :
SWITCH(config)#rmon stats add <1-65535> <1-10> <1,32>
Where:
<1-65535> is the Statistics group ID.
<1-10> is the Port number.
<1, 32> is the Creator’s name.
The statistics group will record the statistics of data flow through the port
Delete statistics group:
SWITCH(config)#rmon stats delete <1-65535>
Where <1-65535> is the statistics group ID.
Create history group: