KBC Networks ESML6-P3 - Manual (Page 12)

Ethernet Switch User Manual
Manual_cmd_line_config-ESML6-P3-Rev1106
Copyright © KBC Networks Ltd. Page 11 of 49 www.kbcnetworks.com
2.3.2 Password Configuration
The ESML6-P3 supports a password checking function in Command Line and Telnet. Go
into Configuration Mode (see section 2.2.1). In Configuration mode type:
SWITCH(config)# enable password <1-20>
2.3.3 Version number
To display the software version number use the following command:
SWITCH#show version
2.3.4 Switch running function
To display the system running function, go into Configuration Mode and type the
following command:
SWITCH#show running-config
2.3.5 Switch configuration information
In Configuration Mode type the following command:
SWITCH#show config
2.3.6 Save configuration and restore default configuration
To save current configurations:
SWITCH#save
To restore default configuration:
SWITCH#load default