Drylam Fujipla ALM3220 - Manual (Page 7)

AL-MEISTER ALM3220 Instruction Manual
7
1. IMPORTANT SAFETY PRECAUTIONS (cont’d)
1-4. SAFETY PRECAUTIONS (cont’d)
Do not laminate:
•Money or valuable securities.
•Paper with staples.
•Magnets, or magnetic documents.
•Flammable paper or material that is affected by heat such as vinyl chloride or polyethylene.
•Unique and irreplaceable documents.
•Paper thicker than 0.4mm including film thickness.
•Paper that discolors and changes in quality with heat such as thermal papers and crayoned pictures.
•Paper that contains a lot of moisture.
•Items other than paper (magnets, vinyl, etc.)
•Paper that is curved or has creases.
CLEANING OF EXTERIOR
Be sure that the machine is unplugged.
Before cleaning the machine turn off the power and let the machine cool down.
Wipe off stains with a soft cloth. When stains are persistent use a firmly squeezed soft cloth soaked in a
small quantity of water or detergent. Wipe off the residue of detergent with a cloth soaked in water.
USEFUL INFORMATION – FILM END
This model has a function that gives caution that the film will end soon. The final few feet of film has
either black colored film or the black colored tape on the film. Please note when doing continuous
lamination, that one or two sheets may be laminated with the black tape when film runs out. Therefore,
in order to avoid this problem, please check the remaining film amount on the display from time to time.
It is recommended to provide extra prints when laminating.
RECYCLING INFORMATION
This is a serviceable electronic device which contains components which should be replaced at the end
of their effective lives. You can help control emerging risks by disposing of the electronic device
separately from your domestic waste. Electric and electronic devices marked with a crossed out waste
bin indicate that these products should not be disposed of together with domestic waste as there may
be a severe impact on the environment as well as human health due to the possibly of hazardous
materials.