Drylam Fujipla ALM3220 - Manual (Page 48)

AL-MEISTER ALM3220 Instruction Manual
48
9. SPECIFICATIONS
NOTES:
*Corners are cut square.
*Warm-up time may differ according to the environment.
(end)
Model ALM3220
Maximum Laminating Paper
Width 12.24"
Maximum Laminating
Thickness 16mil (including film thickness) (.016”)
Film Thickness 1.5 – 3mil - 5mil Exclusive AL-Roll Film (.0015” - .003” - .005”)
Paper Thickness 3-10mil (65-240 gsm) (20# cover – 93# cover)(.003” – .01”)
Laminating Speed 20" - 48"/min. (adjustable in 4”/min. increments)
Temperature 170F- 270F
Warm-up Time Approx. 5-7 minutes
Power Source AC 120V 60 Hz
Power Consumption 900W
Dimensions 51.0"(W) X 22.0"(D) X 43.3"(H) with Stand, Feeder Tray, Feeder Tray
Extension and Exit Tray installed.
Weight Laminator : 110 LBS; Stand : 48.5 LBS; 158 LBS total
Feeder capacity 200 pages (copying paper)
Exit Tray capacity 200 pages (copying paper laminated with 5mil film)
Finished Size (utilizing slots in
the Trimming Unit) Letter (8.5 x 11”); With Margin: 8.74" X 11.24"; Without Margin: 8.38" X
10.88". Will process 200 sheets/hour at this size.
Double Letter (11 x 17”); With Margin: 11.24" X 17.24"; Without
Margin: 10.88" X 16.88"
Digital Paper (12 x 18”) With Margin: 12.24" X 18.24"; Without Margin:
11.88" X 17.88"
*The finished size is accurate to within less than 20mil either way.
Long Mode (version B03.1 only): Any of the above widths with unlimited
length.
Remarks Within the range of 32F to 105F (68 +/- 40F recommended)/an altitude
below 6600'.
Attachments Box 1: Feeder Tray -- Extension Feeder Tray -- Exit Tray -- Power Cord --
This manual -- Waste Collection Box
Box 2: Stand -- Stand Assembly Instructions -- Screws and tool for
assembling Stand.