Initial threading of the alm3220 (cont’d) – Drylam Fujipla ALM3220 User Manual
Page 24
AL-MEISTER ALM3220 Instruction Manual
24
4. INITIAL THREADING OF THE ALM3220 (cont’d)
C) "LAMINATION ERROR" appears on the display.
In these cases remove the jammed film.
Follow the trouble shooting procedures of the instruction manual.
20. When film is properly overlapped, there are no
wrinkles or bubbles, and film exits without curl the
machine is properly setup and ready to be run in
automatic mode.
21. Set the Trimmer levers at their desired positions.
22. Close all the covers in the order of Film Cover, Feeder
Cover and Front Cover. The machine is ready for automatic
operation.