Drylam Fujipla ALM3220 - Manual (Page 26)

AL-MEISTER ALM3220 Instruction Manual
26
5. AUTOMATIC OPERATION (cont’d)
5-2. SETTINGS
5-2-1. SET TEMPERATURE
Press TEMP./SPEED key once.
* The default is set at 210F. This is the
power on default and may not be high
enough for some paper stocks.
Press UP or DOWN key to set temperature. Temperature can be set in 10F
increments. The temperature display blinks.
Press TEMP./SPEED key to confirm the temperature.
This table shows an example of temperature settings for different film and paper thicknesses. It pays to
experiment with different temperatures and speeds to achieve quality laminations.
Film thickness Copying paper Thicker paper
1.5mil 210F - 40"/min 220F - 40" /min
3mil – 4mil 220F - 40" /min 230F - 40" /min
5mil 230F - 40"/min 240F - 40" /min