Cleaning and lubricating the heat c h a m b e r s – Drylam Fujipla ALM3220 User Manual
Page 45
AL-MEISTER ALM3220 Instruction Manual
45
8. CLEANING AND LUBRICATING THE HEAT C H A M B E R S
With continuous use the heat chambers will accumulate adhesive
and dirt. It is recommended that you periodically inspect them for
adhesive build-up. Use DryLam Cleaning Kit (part number CLKIT), which
contains Xenit Cleaner and a sponge, for removal of any adhesive
build up.
Other suggested solvents are
Rubbing alcohol (isopropyl 70%, or higher)
Goof-Off®,
Acetone
Poly-Off®