Drylam Fujipla ALM3220 - Manual (Page 32)

AL-MEISTER ALM3220 Instruction Manual
32
5. AUTOMATIC OPERATION (cont’d)
5-2-4. SET COUNTER (continued)
Example of setting 100 sheets:
In this example:
0: finished number/100: set value
Lamination errors do not affect counting
Example of setting multi:
When you select multi all the papers in the
feeder tray will be laminated.
* The default is set to multi.
5-2-5. MARGIN SET
Select MARGI N SET.
NOTE: Defaults to MARGIN ON after power
outage.
Press UP or DOWN key to turn MARGINS on or off.
Press MODE key to confirm.