Doremi DSV-J2 - Manual (Page 8)

2 Caution
2.1 Drives Insertion
2.1.1 General Rule
Do not insert drives if the unit is powered on.
2.1.2 HDDs Shipment
Drives (HDDs) might be shipped out of the chassis. If this is the case, insert them before
plugging in the power cables, according to the procedure presented below:
 Identify the label written on each HDD. You should have one top, one center, and one
bottom (Figure 1):
Figure 1: HDD Label Location – Example of TOP label
 For each HDD, press on the blue button located on its front side in order to release the
grey handle and open the handle all the way until it clicks (Figure 2).
Figure 2: HDD – Grey Handle Opening
 Open the door covering the HDD cage, located on the right side of the front panel.
DSV.OM.000391.DRM Page 8 of 68 Version 1.3
Doremi Labs
HDD label location
Blue button
Grey handle