Doremi DSV-J2 - Manual (Page 12)

3.2 DSV-J2 Rear Panel
Two different rear panels can be found on the DSV-J2, depending on the motherboard used.
The SuperMicro motherboard is illustrated in Figure 9, while the Intel motherboard is presented
in Figure 10:
Figure 9: DSV-J2 Rear Panel – SuperMicro Motherboard
Figure 10: DSV-J2 Rear Panel – Intel Motherboard
On the right side of the rear panel is the dual-redundant power supply. Make sure that two AC
power cables are used or the unit will sound an audible alarm until both power cables are
connected. To temporarily disable the audible alarm, press the red button next to the AC power
connectors.
CAUTION: Insert drives before the power cables.
Note: Powering the DSV-J2 with only one AC cable is not recommended.
On the left side of the rear panel are the motherboard connections. These are for the keyboard,
mouse, VGA, 9-pin serial, Ethernet, and USB 2.0 connections. Please see Section 4.3 for
detailed information on motherboard connections.
DSV.OM.000391.DRM Page 12 of 68 Version 1.3
Doremi Labs