Doremi DSV-J2 - Manual (Page 19)

 With the LTC Output option (flagged with “LTC” mark above the BNC connector), the
connector outputs the linear time-code (LTC) compliant with SMPTE 12M.
 With the DolphiLock option (flagged with “SYNC IN” mark above the BNC connector), the
connector is a SYNC input. It can be used to synchronize the Dolphin DCI board, thus the
playback, with an external device.
4.3 DSV-J2 Motherboard Connections
4.3.1 Motherboard Connectors
4.3.1.1 SuperMicro Motherboard Connectors
Figure 20: Rear Panel – SuperMicro Motherboard Connectors
On the rear panel of the unit are the connections to the motherboard (Figure 20). These
connectors are described in Sections 4.3.2 to 4.3.6.
4.3.1.2 Intel Motherboard Connectors
Figure 21: Rear Panel – Intel Motherboard Connectors
On the rear panel of the unit are the connections to the motherboard (Figure 21). These
connectors are described in Sections 4.3.2 to 4.3.6.
DSV.OM.000391.DRM Page 19 of 68 Version 1.3
Doremi Labs
Mouse
Serial
Port
VGA Ethernet
(Eth0)
USB
Ports
Ethernet
(Eth1)
Keyboard
Mouse
Serial Port VGA Ethernet
(Eth0)
USB
Ports
Ethernet
(Eth1)
Keyboard