Doremi DSV-J2 - Manual (Page 22)

9.) Enter the desired device broadcast address then select OK.
10.) Select Yes for eth1.
11.) Select No for Removable device.
12.) Select No for automatically configure device with DHCP.
13.) Enter the IP address of eth1 and select OK. In our example, enter 192.168.10.12.
14.) Enter the desired default gateway or leave empty and select OK.
15.) Enter the desired subnet mask and select OK. In our example, enter the same subnet
mask as the projector: 255.255.255.0.
16.) Enter the desired device broadcast address then select OK. In our example, enter
192.168.10.255.
17.) Leave empty the system’s domain name servers and select OK.
You will now exit the setup utility.
 To verify your setup, go to Menu → Doremi Apps. → Diagnostic Tool and verify the IP
Address under the Diagnostic Tool System Tab.
DSV.OM.000391.DRM Page 22 of 68 Version 1.3
Doremi Labs