AVUE G55IR-WB36N – Outdoor 36X Long Range IR PTZ - Manual (Page 35)

User can set the time of preset, scan, tour and pattern.
1.Call 95 preset or call 9 preset twice within 3 seconds to enter into the main
menu.
2. Operate the joystick, move the cursor to FUNCTION SETTING , press
OPEN to call the submenu.
3. Operate the joystick, move the cursor to TIME RUNNING , press
OPEN to enter into the menu setting. Please refer to the left picture.
DAY set the date
TIME CHANNEL 4 channels can be set.
START TIME Set the start time
END TIME
Set the end time
RUNNING User can set the preset , scan , tour,
pattern to every channel.(1-4)
4. This channel will not conflict with other channels when you set
RUNNING as close.
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
【 】
1.When user do the action of scan, tour or pattern, if time is over,
then the PTZ will execute park action, the user's action will
stop. After the time, the PTZ will resume the action and preset
which is set before the park time. (Before the park time, if the
PTZ is on some preset, the PTZ will resume the preset, if PTZs
execute the action of scanning, tour or pattern, the PTZ will resume
original action. If users handle some action with keyboard, PTZ
will also resume the action which users are going on with keyboard.)
2. During the timing period of movement function, it is not allowed
that there is no action. When users handle the PTZ, the timing
movement function will interrupt. If there is no any action during
30 seconds, it will be in the state of timing function, and return
to the timing movement function. Or if there is idle function,
it will be do the action of idle time function.
3. Timing function will close while user setting presets, right and
left limit, menu status, recording scan and setting any other function.
4.When the PTZ execute alarm, timing, idle function, the priority for
alarm is the highest, for timing is the second, for idle is the lovest.
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
BACK
EXIT
DAY SAT
TIME CHANNEL 1
START TIME 00:00
END TIME 00:00
RUNNING TOUR1
BACK
EXIT
TIME RUNNING
6 . 6 Time running
Function setting
32
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
LANGUAGE
EXIT