AVUE G55IR-WB36N – Outdoor 36X Long Range IR PTZ - Manual (Page 32)

6. 3 Pattern
2
3
4
5
6
、
、 【 】
【 】
、 【 】 【 】 “
”
、 【 】
【 】
、 【
】 【 】
【 】
、 【 】 【 】
Pattern is built-in function in camera; the PTZ can record tracks that are
no less than 180s. (A series of pan/tilt controlling and lens controlling
command). A PTZ may set up to 4 pattern tours.
1 The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds.
Operate joystick, move the cursor to FUNCTION SETTING , press
OPEN to enter submenu.
Operate joystick to PATTERN , press OPEN to enter menu Pa-
ttern .
Choose pattern number: move the cursor to PATTERN NUMBER ,
press OPEN , pattern you choose as current pattern, the following oper-
ations aim at the current pattern;
Define current pattern tour: move the cursor to PROGRAM
PATTERN , press OPEN to set pattern track, move the image random,
and draw the focus. The PTZ has a tour that is no less than 180s, a series of
park time, magnification, focus will be recorded, press OPEN to save.
Run pattern: operate joystick to RUN PATTERN , press OPEN
to run, the PTZ will continuously and repeatedly record the specific track.
PATTERNS
PATTERN NUMBER
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
EDIT PATTERN LABEL
LABEL PATTERN-1
BACK
EXIT ：
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
BACK
EXIT
When carry out program, run, clear pattern and edit
label, should choose pattern number at first.
● 【 】
● 【 】
● 【 】
● 【 】
● 【 】
PATTERN NUMBER
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
Function setting
29
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
LANGUAGE
EXIT