System setting, 7 password set – AVUE G55IR-WB36N – Outdoor 36X Long Range IR PTZ User Manual
Page 19

OLD PASSWORD ******
NEW PASSWORD ******
CONF PASSWORD ******
ENABLE PASSWORD OFF
BACK
EXIT
:
:
:
:
PASSWORD SETUP
4.7 Password set
1. The system enters into the main menu by calling 95 preset or by calling 9
preset twice within 3 seconds.
2. Operate the joystick up and down, move the cursor to SYSTEM
SETTING , press OPEN to call the submenu.
【
】
【
】
3. Operate the joystick up and down , move the cursor to PASSWORD
SETUP , press OPEN
to call the submenu. Please refer to the left
picture.
【
】
【
】
4. Operate the joystick up and down , move the cursor to OLD
PASSWORD , press OPEN to choose it, operate the joystick right and
left to input the password, Tilt up and down to choose the number which you
need.
【
】
【
】
NEW PASSWORD Enter the new password
● 【
】
CONFIRM PASSWORD
Confirm the new password
● 【
】
ENABLE PASSWORD
Set PASSWORD off / on
● 【
】
(The password function is noneffective under the PASSWORD OFF.) It
means that users can enter into the main menu without password. (The password
function is effective under the password ON.) It means that user enter into
the main menu with password.
When user forgot the password and can not enter into the
main menu, he can use the super password to enter ,which
is "892226" At this time ,the password of PTZ will
change to initial one, which is "000000",and then user may
set the password by himself again.
,
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
DOME ADDRESS
System Setting
16
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
LANGUAGE
EXIT