AVUE G55IR-WB36N – Outdoor 36X Long Range IR PTZ - Manual (Page 31)

6. 2 Scan
1
SCAN SPEED
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
CLEAR SCAN
EDIT SCAN LABEL
3
、
“ ”
】
】
、
、
、
“ ”
、
● 【 】
● 【 】
● 【 】
● 【
● 【
● 【
】
● 【 】
【 】
【 】 【 】
【 】
【 】 【 】
【
】 【 】
【 】
【 】
【 】 【 】
SCAN NUMBER
Scan is that preset two points , then the camera repeatedly scan betw-
een the two points at a stable speed, the same magnification and pan. A do-
me has four scan tour.
The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds. click menu to enter scan menu, as the
left picture shows.
Scan speed setting: operate joystick to SCAN SPEED , press
OPEN , tilt up/down joystick to adjust scan speed, press OPEN to
save.
4 Left limit setting: operate joystick to SET LEFT LIMIT , press
OPEN , operate joystick to choose objective image, press OPEN to
save. Right limit setting is the same as left limit setting
.
5 Edit scan label: operate joystick, move the cursor to EDIT SCAN
LABEL , press OPEN to enter submenu edit label , move the cur-
sor to LABEL , the system will auto-set the label as AUTO SCAN, press
OPEN to revise.
6 Run scan: operate joystick to RUN SCAN , press OPEN to exit
the menu, and it stars to run scan.
SCAN
SCAN NUMBER 04
SCAN SPEED 50
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
CLEAR SCAN
EDIT SCAN LABEL
BACK
EXIT
EDIT SCAN LABEL
LABEL AUTO SCAN
BACK
EXIT ：
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
BACK
EXIT
The label can set up to 16 characters, and doesn't need editing
characters. Pressing OPEN continuously to jump over and using
spacebar to replace the deleted characters. When you finish to edit a
character, pressing OPEN to enter into the next editing character
when you finish to edit the last character, pressing
OPEN to save.
Press CLOSE to exit.
Character of label is suitable for choosing as follow: 0-9 A-Z :
<>-. , Space. The editing ways of other labels are the same as above.
、 、
【 】
【 】
【 】
【 】
1. left limit and right limit of scan can't be set the same point.
2.Under scan process, speed, magnification and tilt direction won't
change, if the speed, magnification and tilt direction of the two
limits are inconsistent, run scan is base on left limit.
2 Define current scan number: operate joystick ,move the cursor to SCAN
NUMBER ,press OPEN ,tilt up/downjoystick to choose scan number,
press OPEN to save .the following operations aim at the current scan
number. 、 【
】 【 】
【 】
Function setting
28
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
LANGUAGE
EXIT