AVUE G55IR-WB36N – Outdoor 36X Long Range IR PTZ - Manual (Page 30)

6. 1 Preset
6. Function setting
1
Define
、
“
”
、 【
】 【 】
、 【 】
【 】
【 】
、 【 】
【 】
、 【 】
【 】
、 【 】
【 】
【 】
5
6
The system enters into the main menu by calling 95 preset or by calling
9 preset twice within 3 seconds. Click each command to enter preset m-
enu according to the order of the left picture. As following:
preset and call preset function can be set by keyboard operat-
ion, input preset number at first, then click the key save /call preset to
carry out.
2 Define current preset number: move the cursor to PRESET N UMB-
ER ,press OPEN to choose preset number, the range is 01-128as the
left picture show, here chooses number 5 as current preset, the following
operations aim at the current preset.
3 Define current preset: move the cursor to SET PRESET ,press
OPEN , by operating joystick to adjust magnification, to choose good
objective image, press OPEN to save. If the image is very near, the I-
mage is belong in digital zoom; when setting preset, the image will jump to
maximal optical zoom.
Display current preset: move the cursor to SHOW PRESET , press
OPEN , the screen will display the current preset;
Clear current preset: move the cursor to CLEAR PRESET , press
OPEN , the current preset is cleared.
Edit current preset label: move the cursor to EDIT PRESET LABEL ,
press OPEN to enter into editing preset submenu, system auto-sets la-
bel as PRESET-XX, press OPEN to revise label.
“ ”
4
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
BACK
EXIT
PRESETS
PRESET NUMBER 05
SET PRESET
SHOW PRESET
CLEAR PRESET
EDIT PRESET LABEL
BACK
EXIT
EDIT PRESET LABEL
EDIT PRESET LABEL
LABEL PRESET-05
BACK
EXIT ：
Preset function is that PTZ stores current pan/tilt angle, zoom
and other position parameters into the memory. When necessary PTZ
recalls these parameters and adjust camera to that position.
1.When running to program, display, clear preset and edit label,
should choose preset number at first.
2. The label may set up to 16 characters, and doesn't need editing
characters. Press OPEN continuously to jump over and use
spacebar to replace the deleted characters.
When you finish to edit a character, press OPEN to enter
into the next editing character;
when you finish to edit the last character, pressing OPEN
to save. Press CLOSE to exit. Character of label is suitable for
choosing as follow: 0-9 A-Z :<>-. , space. 、 、
【 】
【 】
【 】
【 】
●
●
●
●
●
PRESET NUMBER
SET PRESET
SHOW PRESET
CLEAR PRESET
EDIT PRESET LABEL 【 】
【 】
【 】
【 】
【 】
Function setting
27
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
LANGUAGE
EXIT
OPERATION KNACKS