AVUE G55IR-WB36N – Outdoor 36X Long Range IR PTZ - Manual (Page 21)

1.
2.Tilt up/down the joystick and move the cursor to SYSTEM
SETTING , press OPEN to enter submenu.
3.Tilt up/down the joystick and move the cursor to DOME ADDRESS ,
press OPEN to call dome parameter setting menu
.
: Series No. of the dome
: Confirm S/N and input the same NO. with S/N
: Set dome address (ID range: 001-255)
The system enters into the main menu by calling 95 preset or by calling 9
preset twice within 3 seconds.
【
】 【 】
【 】
【 】
S/N
CONF
DOME ADDRESS
TIME 03:20:18
DATE 07:10:10
DAY WED
BACK
EXIT
SYSTEM SETTING
EDIT PTZ LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
DOME ADDRESS
BACK
EXIT
CLOCK SETTING
1.If S/N and CONF are different, the above operation
can't be implemented.
2.The PTZ address should be set as 255 (mean set Switch
1 as ON), there will be display this item
PTZ ADDRESS
3.After setting PTZ address, the PTZ need to restart, then
the PTZ address will be effective.
【 】 【 】
【 】
4.9 DOME Address Setting
System Setting
18
MAIN MENU
SYSTEM SETTING
CAMERA SETTING
FUNCTION SETTING
WINDOW BLANKING
ALARMS
LANGUAGE
EXIT