Dimension One Spas Bay Collection - Manual (Page 33)

2004 Bay Collection
Owner’s Manual
Push the Light / Enter Button to control your Dynamic LED lighting. This
includes both the Fountain and the Spa lights, which are synchronized to operate
together. The lights have three basic Color Effects you can choose. Simply press
the Light / Enter Button until you find the one you want. The Color Effects
are:
• Color Fade Slow: This sequence rotates through all colors
approximately once per minute. (Start up default)
• Color Fade Fast: This sequence rotates through all colors
approximately three times per minute.
• Color Hold: Hold on any of the colors.
The default Color Effect is Color Fade Slow. Use the Light / Enter Button
to change Color Effects as follows:
• Start on Color Fade Slow (default)
• Turn off for 1 second, back on again for Color Hold
• Turn off for 1 second, back on again for Color Fade Fast
• Turn off for 1 second, back on again for Color Hold
• Turn off for 1 second, back on repeats to Color Fade Slow
• Turn off for 5 or longer: start on Color Fade Slow
For your convenience and cost savings, the lights will
automatically turn off after one hour. To reactivate the lights after
they have been shut off by the timer, simply press the Light /
Enter Button again. The lights will always start in the Color
Fade Slow sequence after they have been off for more than 5
seconds to ensure they always remain synchronized.
Light / Enter Button
The Light / Enter Button is also used to exit programming sequence whenever
you have entered the programming mode by first pressing the Program
Button.
PROGRAM Button
The PROGRAM Button is used to initiate the time setting, filter programming,
and other programming features.
For more information, see the section on “
Programming the Scrolling Message
Center .”
27