Dolphin Peripherals 6100 - Manual (Page 73)

4 - 5
Sample Autorun Configuration File
A sample Autorun.exm file installs on the workstation to C:\Program Files\Honeywell\Power Tools and
Demos for WM 5.0\EZConfig EXM Files.
For more information, see
Sample EXM Files on page 2-2.
Start Options
Start Options define the required system parameters for a software application to launch. The following values can be entered
for the StartOption key, wherever it appears:
Option Name The program launches if … Category
DISABLED Never, regardless of other startup options specified. None
COLDBOOT The terminal has performed a cold boot.
Boot type
WARMBOOT The terminal has performed a warm boot.
TOUCH The terminal has a touch screen display installed.
Touch screen
NONTOUCH The terminal doesn’t have a touch screen display installed.
BATCH The terminal is a batch unit (no RF or internal modem cards
installed).
Mobility
RF The terminal has an RF card installed (e.g., Cisco 802.11b).
GSM The terminal has a GSM radio.
BT The terminal has a Bluetooth radio.
MODEM The terminal has an internal modem card installed.
IMAGER The terminal has an imager installed.
Scanner
LASER The terminal has a laser scanner installed.
BLIND The terminal has no laser or imager installed.
ANYSCAN The terminal has either an imager or a laser scanner installed.
RFON RF Radio is Enabled.
GSMON GSM is enabled.
BTON Bluetooth is enabled.
RFGSMBTOFF RF, GSM, & Bluetooth are disabled.