Dolphin Peripherals 6100 - Manual (Page 113)

6 - 9
NoSIP
NoSIP toggles the Soft Input Panel (SIP) between enabled and disabled. When disabled, the SIP does
not pop up over application windows automatically. In addition, the SIP icon does not appear in the
Command bar on application windows.
Note: NoSIP does not appear on the Dolphin 6100/6500/7600.
To Enable NoSIP
1. Tap Start > Power Tools. The Dolphin Power Tools Main Window (see page 1-2) appears.
2. Tap the NoSIP icon once . The SIP should not pop up on application screens.
Note: To disable the SIP automatically after each hard reset, enable the NoSIP Program section of the
Autorun.exm File (see page 4-1).
To Disable NoSIP
Navigate to the Dolphin Power Tools Main Window (see page 1-2) and tap the NoSIP icon again.
OR
Select Exit on the Command Bar Menu (page 6-9).
Command Bar Menu
When NoSIP is enabled, a smaller NoSIP icon appears in the Command bar at the bottom of the Today
screen . Tap this icon to open the Command bar menu.
Menu Item Selecting this item …
Enable SIP Enables the SIP without stopping NoSIP.
When this item is selected, the indicator in the Command bar changes to
to indicate that the SIP is now active, even though the NoSIP is still running.
About Displays version and description information for NoSIP.
Exit Disables NoSIP; the icon no longer appears in the Command bar.