Dolphin Peripherals 6100 - Manual (Page 70)

4 - 2
Enabling and Disabling Sections
If you don’t want to the application to launch at startup, you can delete the section. However, program
sections contain settings you’ll want to keep when adding that same application back to startup. To keep
the program section in the file for future reference, disable the program section instead of deleting it.
Disabled sections appear in gray.
When processing files, the terminal behaves as though disabled sections are not there and moves on to
the next enabled section.
Settings Section Keys—Dolphins 7850, 7900, & 9500
Note: This section and most of its keys are locked, which means that you can change the value but not the name
or description.
Settings Section Keys—Dolphin 6100/6500/7600
Note: This section and most of its keys are locked, which means that you can change the value but not the name
or description.
Key Function Default Available Values
Version Stores the EXM file version. 22 You cannot modify this
value!
ByPassKey Defines the key that can be pressed to bypass
Autorun 42=SCAN
key
StartMenu Enables and disables the Start menu during
Autorun 1 0=Disable; the Start menu
is disabled during
Autorun.
1=Enable; the Start menu
is enabled.
Debug Controls the debug function at AutoInstall. 0 0=Disable
1=Enable, an autorun.log
file is created in the
\IPSM
folder.
TestMode Runs the terminal in test mode and tests the
functionality of AutoInstall. This is a diagnostic tool.
When enabled, applications stored in the
AutoInstall folder, including the radio drivers, are
not loaded during startup. 0 0=Disable
1=Enable
EZConfigKey Specifies a key that launches EZConfig Client
before Autorun starts processing the Programs
section; i.e., before Autorun starts launching
programs. 9=Tab key Empty=You must launch
EZConfig Client to scan
bar codes from
EZConfig Editor
Key Function Default Available Values
Version Stores the EXM file version. 22 You cannot modify this
value!