Altera Cyclone V SoC - Manual (Page 8)

2–2 Chapter 2: Software Installation
Installing the Development Kit
Cyclone V SoC Development Kit November 2013 Altera Corporation
User Guide
■ Application examples that enable firmware and application software development
The SoC EDS includes an exclusive offering of the ARM Development Studio™ 5
(DS-5™) Altera Edition Toolkit . The ARM DS-5 combines advanced multicore
debugging capabilities with FPGA adaptivity. With Altera’s SignalTap™ II Logic
Analyzer, embedded software developers have full-chip visibility and control.
f For the steps to install the SoC EDS Design Suite, refer to the Altera SoC Embedded
Design Suite User Guide .
Installing the Development Kit
Perform these steps:
1. Download the Cyclone V SoC Development Kit installer from the Cyclone V SoC
Development Kit page of the Altera website. Alternatively, you can request a
development kit DVD from the Altera Kit Installations DVD Request Form page of
the Altera website.
2. Start the Cyclone V SoC Development Kit installer.
3. Choose an installation directory that is relative to the Quartus II software
installation directory. Follow the on-screen instructions to complete the
installation process.
4. For the latest issues and release notes, Altera recommends that you review the
readme.txt located in the root directory of the kit installation.
The installation program creates the Cyclone V SoC Development Kit directory
structure shown in
Figure 2–1 .
Figure 2–1. Cyclone V SoC Development Kit Installed Directory Structure (1)
Note to Figure 2–1 :
(1) Early-release versions might have slightly different directory names.
documents
board_design_files
The default Windows installation directory is C:\altera\ \.
examples
factory_recovery
demos
kits
cycloneVSX_5csxfc6df31_soc