Pilz PSSu E S 4DO 0.5-D - Manual (Page 3)

Content
Operating Manual PSSu E S 4DO 0.5-(T)D
21951-EN-06
3
Section 1 Introduction 5
1.1 Validity of documentation 5
1.1.1 Retaining the documentation 5
1.1.2 Terminology: System environment A and B 5
1.2 Definition of symbols 6
Section 2 Overview 7
2.1 Module structure 7
2.1.1 Module features 7
2.2 Front view 8
Section 3 Safety 10
3.1 Intended use 10
3.2 Safety regulations 11
3.2.1 Use of qualified personnel 11
3.2.2 Warranty and liability 11
3.2.3 Disposal 11
Section 4 Function description 12
4.1 Module features 12
4.1.1 Function description 12
4.1.2 Integrated protection mechanisms 13
4.1.3 Reaction times 13
4.2 Configuration 13
4.2.1 PSSu assignment in system environment A 13
4.2.1.1 Addresses in the process image 13
4.2.1.2 Status byte 14
4.2.2 PSSu assignment in system environment B 14
Section 5 Installation 15
5.1 General installation guidelines 15
5.1.1 Dimensions 15
5.2 Installing the base module 16
5.3 Inserting and removing an electronic module 17
5.3.1 Inserting an electronic module 18
5.3.2 Removing an electronic module 19
5.3.3 Changing an electronic module during operation 19
Section 6 Wiring 20
6.1 General wiring guidelines 20
6.1.1 Mechanical connection of the base modules 20
6.2 Terminal configuration 22
6.3 Connecting the module 24