Pilz PSSu E S 4DO 0.5-D - Manual (Page 28)

Technical details
Operating Manual PSSu E S 4DO 0.5-(T)D
21951-EN-06
28
Semiconductor outputs 312406 314406
Max. processing time of semicon-
ductor output when signal changes
from "1" to "0"
0,500 ms 0,500 ms
Max. processing time of semicon-
ductor output when signal changes
from "0" to "1"
0,010 ms 0,010 ms
Potential isolation from system volt-
age
Yes Yes
Short circuit-proof Yes Yes
Permitted loads Inductive, capacitive, resistive Inductive, capacitive, resistive
Environmental data 312406 314406
Climatic suitability EN 60068-2-1, EN 60068-2-14, EN
60068-2-2, EN 60068-2-30, EN
60068-2-78
EN 60068-2-1, EN 60068-2-14, EN
60068-2-2, EN 60068-2-30, EN
60068-2-78
Ambient temperature
In accordance with the standard EN 60068-2-14 EN 60068-2-14
Temperature range 0 - 60 °C -40 - 70 °C
Storage temperature
In accordance with the standard EN 60068-2-1/-2 EN 60068-2-1/-2
Temperature range -25 - 70 °C -40 - 70 °C
Climatic suitability
In accordance with the standard EN 60068-2-30, EN 60068-2-78 EN 60068-2-30, EN 60068-2-78
Humidity 93 % r. h. at 40 °C 93 % r. h. at 40 °C
Condensation Not permitted Short-term
EMC EN 61000-4-2, EN 61000-4-3, EN
61000-4-4, EN 61000-4-5, EN
61000-4-6, EN 61131-2
EN 61000-4-2, EN 61000-4-3, EN
61000-4-4, EN 61000-4-5, EN
61000-4-6, EN 61131-2
Vibration
In accordance with the standard EN 60068-2-6 EN 60068-2-6
Frequency 10,0 - 150,0 Hz 10,0 - 1000,0 Hz
Max. acceleration 1g 5g
Shock stress
In accordance with the standard EN 60068-2-27 EN 60068-2-27
Acceleration 15g 15g
Duration 11 ms 11 ms
In accordance with the standard EN 60068-2-29 EN 60068-2-29
Acceleration 10g 25g
Duration 16 ms 6 ms
Max. operating height above sea
level
2000 m 5000 m
Airgap creepage
In accordance with the standard EN 60664-1, EN 61131-2 EN 60664-1, EN 61131-2
Overvoltage category II II
Pollution degree 2 2
Protection type