Pilz PSSu E S 4DO 0.5-D - Manual (Page 10)

Safety
Operating Manual PSSu E S 4DO 0.5-(T)D
21951-EN-06
10
Safety
Intended use
The module may be used for standard applications in system environment A and B.
The module provides type 1 outputs in accordance with IEC 61131-2. It may be used to
switch:
} Resistive loads
} Inductive loads
} Capacitive loads
The module PSSu E S 4DO 0.5-TD is suitable for use where there are increased environ-
mental requirements (see Technical Details).
Intended use includes making the electrical installation EMC-compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the module
} Use of the module outside the areas described in this manual
} Any use of the module that is not in accordance with the technical details.
Information
The module is supported by:
} PSSuniversal Configurator and PSSuniversal Assistant from Version
1.6.0
} PAS4000 from version 1.8.0
– We recommend that you always use the latest version (download
from www.pilz.de).
The PSSu E S 4DO 0.5-D module may be used in conjunction with the following base mod-
ules:
} PSSu BP 1/8S
} PSSu BP 1/8C
} PSSu BP-C 1/8S
} PSSu BP-C 1/8C
} PSSu BP 1/12S
} PSSu BP 1/12C
} PSSu BP-C1 1/12S
} PSSu BP-C1 1/12C
3
3.1