Pilz PSSu E F 2DI 60-R - Manual (Page 10)

Safety
Operating Manual PSSu E F 2DI 60­R
1002506­EN­02 10
3 Safety
3.1 Intended use
The module may be used for failsafe applications in system environment B (automation
system PSS 4000).
The module meets the requirements of EN IEC 61508 up to SIL 3.
The failsafe inputs are not classified in accordance with the standard IEC 61131­2.
The module PSSu E F 2DI 60­R­R is suitable for use where there are increased environ­
mental requirements demanded by railway applications (see Technical Details).
Intended use includes making the electrical installation EMC­compliant. Please refer to the
guidelines stated in the "PSSuniversal Installation Manual". The module is designed for use
in an industrial environment. It is not suitable for use in a domestic environment, as this can
lead to interference.
The following is deemed improper use in particular:
} Any component, technical or electrical modification to the module
} Use of the module outside the areas described in this manual
} Any use of the module that is not in accordance with the technical details.
INFORMATION
The module is supported by PAS4000 from Version 1.5.0. We recommend
that you always use the latest version (download from www.pilz.de).
The PSSu E F 2DI 60­R module may be used in conjunction with the following base mod­
ules:
} PSSu BP 1/8S­T
} PSSu BP 1/8C­T
} PSSu BP 1/12S­T
} PSSu BP 1/12C­T
} PSSu BP­C1 1/12S­T
} PSSu BP­C1 1/12C­T
3.2 Safety regulations
3.2.1 Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is someone who, because of their training, experience and current pro­
fessional activity, has the specialist knowledge required to test, assess and operate the
work equipment, devices, systems, plant and machinery in accordance with the general
standards and guidelines for safety technology.
It is the company’s responsibility only to employ personnel who: