Selector switch for setting the station address, 4function description, 2 devicenet – Pilz PSSu H DN User Manual
Page 17: 3 selector switch for setting the station address
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-3
4.2
DeviceNET
4
Function description
4.2.3
Selector switch for setting the station address
Selector switch for setting the station address
4-
][Funktionsbeschreibung_BA_Zusatz DN Station
The station address of a PSSu is set via the “ADDRESS” DIP switches
(“1”, “2”, “4” “8” “16” and “32”). The DIP switches are binary coded. Per-
mitted station addresses are in the range 0
D
... 63
D
.
A station address is set via a combination of the relevant binary coded
switches:
“ADDRESS” DIP switch
Key
Example
Switch designation
OFF
ON
Station address 52
D
- -
Not connected
S2
Transmission rate
S1
32
0
32
D
16
0
16
D
8
0
8
D
4
0
4
D
2
0
2
D
1
0
1
D
INFORMATION
The station address should only be set when the module is
switched off (no voltage applied).
The settings are only transferred when booting. Any changes
made to the settings during operation will not be transferred.
Each station address on DeviceNet must be unique.
ADDRESS
OFF ON
S2
S1
32
16
8
4
2
1
- -
BAUD