Pilz PNOZ m ES Powerlink - Manual (Page 6)

Overview
Operating Manual PNOZ m ES Powerlink
1003193­EN­02 6
2 Overview
2.1 Scope of supply
2.2 Unit features
Using the product PNOZ m ES Powerlink:
Expansion module for connection to a base unit from the configurable control system
PNOZmulti 2 .
The product has the following features:
} Can be configured in the PNOZmulti Configurator
} Connection for Ethernet POWERLINK (Ethernet POWERLINK V 2 protocol)
} Station addresses from 1 ... 239, selected via rotary switch
} The minimum cycle time for an application of 32 Byte Output and 32 Byte Input is
275µs. The minimum cycle time is 500 µs at the maximum PDO size of 254 Byte Input
and 32 Byte Output. (The inputs and outputs in this case are viewed from the Managing
Node.)
} 128 virtual inputs and outputs on the control system PNOZmulti can be defined in the
PNOZmulti Configurator for communication with the fieldbus Ethernet POWERLINK.
} Max. 1 PNOZ m ES Powerlink can be connected to the base unit
} For details of the PNOZmulti 2 base units that can be connected, please refer to the
document "PNOZmulti System Expansion".
} Plug­in connection terminals:
either spring­loaded terminal or screw terminal available as an accessory (see order
reference)