Pilz PNOZ m ES Powerlink - Manual (Page 14)

Commissioning
Operating Manual PNOZ m ES Powerlink
1003193­EN­02 14
6.3 Interface assignment
RJ45 socket
8­pin PIN Standard
8 1
1 TD+ (Transmit+)
2 TD­ (Transmit­)
3 RD+ (Receive+)
4 n.c.
5 n.c.
6 RD­ (Receive­)
7 n.c.
8 n.c.
n.c.: Not connected
6.4 Download modified project to the PNOZmulti safety system
As soon as an additional expansion module has been connected to the system, the project
must be amended using the PNOZmulti Configurator. Proceed as described in the operat­
ing instructions for the base unit.
NOTICE
For the commissioning and after every program change, you must check
whether the safety devices are functioning correctly.
6.5 Connection example
Ethernet POWERLINK
Managing Node
Ethernet POWERLINK
Slave 1
Ethernet POWERLINK
Slave 2
Ethernet POWERLINK
Slave 3