Pilz PNOZ mmc3p DP - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- Bestimmung/Gertebeschreibung_multi_Feldbus_PROFIBUS
The expansion module PNOZ mmc3p is used for communication be-
tween the configurable control system PNOZmulti and PROFIBUS-DP.
PROFIBUS-DP is designed for fast data exchange at field level. The ex-
pansion module PNOZ mmc3p is a passive subscriber (Slave) of
PROFIBUS-DP (DPV0). The basic functions of communication with
PROFIBUS-DP conform to EN 50170. The central controller (Master)
reads input information from the slaves and writes output information to
the slaves as part of each cycle. As well as the cyclical transfer of usable
data, PROFIBUS-DP can also be used for diagnostics and commission-
ing functions. Data traffic is monitored on the Master/Slave side.
Bestimmung/Gertebeschreibung_multi_Zusatz_Modul_Mini
The expansion module may only be connected to a base unit PNOZmulti
Mini from the configurable control system PNOZmulti (please refer to the
document "PNOZmulti System Expansion" for details of the base units
PNOZmulti Mini that can be connected).
Bestimmung/Gertebeschreibung_multi_System
The configurable control system PNOZmulti is used for the safety-relat-
ed interruption of safety circuits and is designed for use in:
 E-STOP equipment
 Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_multi_ nicht sicherheitsgerichtete Funkt
The expansion module may not be used for safety-related functions.
Bestimmung/Gertebeschreibung_EMV+Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the product
 Use of the product outside the areas described in this manual
 Use of the product outside the technical details (see chapter entitled
“Technical Details”)