Pilz PNOZ mmc1p ETH - Manual (Page 27)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-3
7.2 Reset Ethernet connection settings
7 Operation
7.2 Reset Ethernet connection settings 7200 Reset Ethernet connection settings 7- ETH_Verbindungseinstellungen_zuruecksetzen_multi
The Ethernet connection settings of the base unit can be configured in
the PNOZmulti Configurator.
You can reset the base unit's Ethernet connection settings to the default
settings.
Proceed as follows:
` Switch off the supply voltage
` Remove the chip card
` Restart the base unit without the chip card inserted.
The Ethernet connection settings are now reset to the default settings.