Pilz PNOZ mmc1p ETH - Manual (Page 15)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-1
4.1 Unit properties
4 Function description
4 4000 Function description Function description 4- 4.1 Unit properties 4100 Unit properties 4- Funktionen_Ethernetschnittstelle_multi
The product PNOZ mmc1p has two Ethernet interfaces to
` Download the project
` Read the diagnostic data
` Set virtual inputs for standard functions
` Read virtual outputs for standard functions.
via Ethernet.
Information on diagnostics via the Ethernet interfaces can be found in
the "Special Applications Technical Catalogue".
Information on communication via Modbus/TCP can be found in the op-
erating instructions "PNOZmulti Modbus".
The connection to Ethernet is made via the two 8-pin RJ45 sockets.
The Ethernet interface is configured in the PNOZmulti Configurator and
is described in the online help for the PNOZmulti Configurator.
4.1.1 Block diagram
Block diagram 4- Blockschaltbild
Base unit
Ether
net