Pilz PNOZ mml2p - Manual (Page 29)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-1
8.1 Technical Details
8 Technical Details
8 8000 Technical Details Technical Details 8- 8.1 Technical Details 8100 Technical Details 8- ][Technische Daten_multi_PNOZ_ml2p
Technical details
Electrical data
Supply voltage U
B
DC 24 V
Voltage tolerance -15 %/+20 %
Power consumption at U
B
DC
without load 5.0 W
Residual ripple DC 5 %
Status display LED
Times
Switch-on delay
5.00 s
Supply interruption before de-energisation 20 ms
Outputs
Maximum output current decentralised module supply
4 A
Short-circuit protection of the decentralised module supply ja
Environmental data
EMC
EN 61131-2
Vibration to EN 60068-2-6
Frequency
10 - 150 Hz
Max. acceleration 1g
Climatic suitability EN 60068-2-14, EN 60068-2-1, EN 60068-2-2,
EN 60068-2-30, EN 60068-2-78
Ambient temperature 0 - 60 °C
Storage temperature -25 - 70 °C
Mechanical data
Protection type
Mounting (e.g. cabinet)
IP54
Housing IP20
Terminals IP20
DIN rail
Top hat rail
35 x 7.5 EN 50022
Recess width 27 mm
Maximum cable run unscreened 30 m
Maximum cable run screened 100 m
Housing material
Housing
PC
Front PC
Cross section of external conductors with screw terminals
1 core flexible
0.25 - 2.50 mm² , 24 - 12 AWG
2 core, same cross section, flexible:
without crimp connectors or with TWIN crimp connectors
0.20 - 1.50 mm² , 24 - 16 AWG
Torque setting with screw terminals 0.50 Nm
Cross section of external conductors with spring-loaded
terminals: Flexible with/without crimp connectors 0.20 - 2.50 mm² , 24 - 12 AWG
Spring-loaded terminals: Terminal points per connection 2
Stripping length 9 mm
Dimensions
Height
100.0 mm
Width 22.5 mm
Depth 120.0 mm
Weight 100 g