Pilz PNOZ mml2p - Manual (Page 11)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-1
3.1 Intended use
3 Safety
3 3000 Safety Safety 3- 3.1 Intended use 3100 Intended use 3- Bestimmung/Gertebeschreibung_multi_Verbindungsmod_ml2p
The expansion module is used to connect decentralised input/output
modules to a safety system PNOZmulti.
Bestimmung/Gertebeschreibung_multi_Zusatz_Modul_Mini
The expansion module may only be connected to a base unit PNOZmulti
Mini from the configurable control system PNOZmulti.
Bestimmung/Gertebeschreibung_multi_System
The configurable control system PNOZmulti is used for the
safety-related interruption of safety circuits and is designed for use in:
 E-STOP equipment
 Safety circuits in accordance with VDE 0113 Part 1 and EN 60204-1
Bestimmung/Gertebeschreibung_EMV+Ausschluss
Intended use includes making the electrical installation EMC-compliant.
The product is designed for use in an industrial environment. It is not
suitable for use in a domestic environment, as this can lead to interfer-
ence.
The following is deemed improper use in particular:
 Any component, technical or electrical modification to the product
 Use of the product outside the areas described in this manual
 Use of the product outside the technical details (see chapter entitled
“Technical Details”)