Pilz PNOZ c2 24VDC 2n/o - Manual (Page 12)

PNOZ c2
Operating Manual PNOZ c2
22212­EN­02 12
Mechanical data 710002
Conductor cross section with spring­loaded terminals:
Flexible with/without crimp connector
0,25 ­ 1,50 mm², 24 ­ 16 AWG
Spring­loaded terminals: Terminal points per connec­
tion
1
Stripping length 9 mm
Dimensions
Height 105,0 mm
Width 22,5 mm
Depth 100,0 mm
Weight 160 g
The standards current on 2012­12 apply.
Safety characteristic data
Operating
mode EN ISO
13849­1:
2008
PL
EN ISO
13849­1:
2008
Category
EN IEC
62061
SIL CL
EN IEC
62061
PFH
D
[1/h]
IEC 61511
SIL
IEC 61511
PFD
EN ISO
13849­1:
2008
T
M
[year]
Safety con­
tacts, in­
stantaneous PL e
Cat. 4 SIL CL 3 2,31E­09 SIL 3 2,03E­06 20
INFORMATION
All the units used within a safety function must be considered when determ­
ining the safety characteristic data of the overall system. As well as these
safety characteristic data, the systematic and structural characteristic data
have to be taken into account.
INFORMATION
A safety function's SIL/PL values are not identical to the SIL/PL values of
the units that are used and may be different. We recommend that you use
the PAScal software tool to calculate the safety function's SIL/PL values.