StorCase Technology DS500 User Manual

Page 67

Appendix D Simple Network Management Protocol (SNMP) Setup

RemotaSilo User’s Guide - Rev. B00

Kingston Technology Company

Appendix D Simple Network
Management Protocol (SNMP) Setup

The RemotaSilo SNMP interface operates only under Windows NT 4.0
(SP3). This feature consists of the following modules:

1. RemotaSilo SNMP Agent - SiloSNMP.DLL
2. RemotaSilo SNMP Management Information Base (MIB) -

RemoSilo.MIB

3. Installer - SiloSNMP.EXE

The Agent module is copied from the distribution diskette onto the hard
disk during the RemotaSilo host software setup. The MIB and the
Installer are located in the SNMP subdirectory of the distribution
diskette. The MIB is ready to be imported into the Network
Management Software (e.g. HP OpenView). Executing the Installer will
setup the following registry keys:

1. HKEY_LOCAL_MACHINE\SOFTWARE\Kingston

Technology\RemotaSilo\SNMPAgent
Pathname=C:\PROGRA~1\KINGST~2\SiloSNMP.DLL

This key specifies the location of the agent module.

2. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic

es\SNMP\Parameters\ExtensionAgents

This key specifies the key that defines the location of the agent
module to the SNMP manager.

3. Restart the SNMP service.