StorCase Technology DS500 - Manual (Page 62)

58 Appendix C Software Features
Kingston Technology Company RemotaSilo User’s Guide - Rev. B00
Options / Host Settings
This dialog allows the user to set the type of connection to the
RemotaSilo and the temperature display preferences.
Connection
Serial port allows the user to select an available COM port for an RS-
232 serial cable connection (default setting is COM1:).
SES/SAF-TE supports the SCSI-3 Enclosure Services (SES)
command set with full compliance to the SCSI Accessed Fault-
Tolerant Enclosures (SAF-TE) specification. This host connection
allows chassis monitoring to the host PC through a SCSI cable instead
of using a serial port connection. If the SCSI connection is not
configured prior to selecting the SES/SAF-TE option, a dialog box will
appear stating “No SES Device Found.” To configure the SES feature,
refer to Appendix D.
If there is a change in the type of connection, a dialog box will appear to
inform you that changes will take effect the next time the software is
started.
Temperature
The temperature can be displayed in either Celsius or Fahrenheit
degrees. Select the desired temperature display and click OK when
finished.