StorCase Technology DS500 - Manual (Page 12)

8 Introduction
Kingston Technology Company RemotaSilo User’s Guide - Rev. B00
System Features
The DS500 RemotaSilo chassis connects to a host PC computer using
the asynchronous serial cable (provided). The RemotaSilo software can
run under Windows 95
® or Windows NT ® , and offers the following
system features:
q Set Chassis Temperature Alarm Levels
q Set System Manager’s Pager, Fax, and E-mail Numbers
q View Chassis Configuration
q Drive Bay Number Assignments
q Temperature Alarm Settings
q System Manager Information
q View Chassis Environmental Specifications
q View +12V and +5V voltage levels output from each
Installed power supply
q View +12V and +5V voltage levels for the installed drives
q View ambient temperature
(within 1
°
accuracy between 0
°
C and 55
°
C)
q View Chassis Alarm Logs
q Detects +12V out of range
±
5%
q Detects +5V out of range
±
5%
q Detects excessive ambient temperature levels
q Detects operating status of installed fan(s)
q Switch to RAID utility programs provided by the RAID controller
q View and modify RAID configuration
q View RAID controller alarm logs which detect operating status
of installed drives via RAID controller
q Supports SES (SCSI-3 Enclosure Services) and SAF-TE (SCSI
Accessed Fault Tolerance Enclosures) protocols
q Supports SNMP (Simple Network Management Protocol) (Windows
NT required for SNMP interface)
q Local host to remote host terminal control transfer (requires
Windows’ built-in
Dial-up Networking utility, or third-party software
such as Norton ® pcANYWHERE).