StorCase Technology DS500 - Manual (Page 17)

Hardware Installation 13
RemotaSilo User’s Guide - Rev. B00 Kingston Technology Company
10BASE-T Ethernet using a Twisted Pair Cable
With an Ethernet twisted pair cable, all RemotaSilo chassis are radially
connected to an Ethernet hub in a star topology. Connect one end of
the twisted pair cable to the rear panel of the RemotaSilo chassis and
the other end to an Ethernet hub.
Note: The RemotaSilo Ethernet connectors are auto-detecting. Do
NOT connect both UTP AND Coaxial cables concurrently. If both
Ethernet connector types are used, only the UTP connector will be
supported. The RemotaSilo Ethernet controller supports only one
cable connection at a time.
Figure 6: Attaching the Twisted Pair Cable
TWISTED PAIR PORT
0802
RJ-45 CONNECTOR