StorCase Technology DS500 - Manual (Page 53)

Appendix C Software Features 49
RemotaSilo User’s Guide - Rev. B00 Kingston Technology Company
Chassis / Drive Bay / C onfiguration / New
To create a new drive bay setting, enter the bay number, the Chassis
ID, the Channel number, and the SCSI ID for the selected drive bay.
Click OK to add the new drive bay mapping to the configuration for the
identified RemotaSilo chassis.
Click Cancel to discard any new drive mapping entries.
Click Test to test the drive failure indicator.
The above operations will return the user to the Chassis / Drive Bay /
Configuration dialog.
To discard all drive bay mappings for the selected RemotaSilo chassis,
click the Reset button while in the Chassis / Drive Bay / C
onfiguration
dialog. The list of drive bay mappings will be cleared.
To accept the addition or changes to the drive bay configuration, click
OK while in the Chassis / Drive Bay / C
onfiguration dialog.
To discard any changes made to the list of drive bay mappings, click
Cancel while in the Chassis / Drive Bay / C
onfiguration dialog.
Chassis / Drive Bay / Reset A ll
To clear all previously defined drive bay mappings for all RemotaSilo
chassis, select Reset All while in the Chassis / Drive Bay pop-up
dialog. The following dialog will appear to confirm the mapping reset:
Press Yes to confirm the drive mapping reset or No to cancel.