StorCase Technology DS500 - Manual (Page 52)

48 Appendix C Software Features
Kingston Technology Company RemotaSilo User’s Guide - Rev. B00
To modify a drive bay mapping, select the bay number, and then click
on the Modify button.
Change the Chassis ID, the Channel number, and the SCSI ID for the
selected drive bay, and then click OK.
Cancel will discard any drive bay setting changes.
Click Test to test the drive failure indicator.
The above operations will return the operator to the Chassis / Drive
Bay / Configuration.
To remove a drive bay mapping, select the bay number, and then click
the Remove button.
The bay will be removed from the configuration for the identified
RemotaSilo chassis.
To add a new drive bay mapping, click the New button.